SECURITY SPECIFICATIONS
• High traffic intuitive loop management system for exceptional security
• Advanced security features with built-in audible and remote alarms
• Magnetic lock control relay outputs with selectable delay times
• Tamper alert relay output triggers “ON” if gate is forced open
• Audible alarm if gate is tampered with or ERD is triggered for heightened security
• Steel cover with lock protects against intruders and vandalism
• Gate disable feature disables all inputs with exception of the fire department and Max Open input
for increased security
• Built-in transaction buffer
• Gate status outputs for gate monitoring
• Key activated jog fuction for emergency OPEN/CLOSE function
• Advanced anti-tailgate feature prevents unwanted intrusion
= Unique to Max Ultra Arm
SAFETY SPECIFICATIONS
• UL 325/991 compliant Class I, II, III, and IV. CSA approved
• Built-in advanced entrapment protection and alarm output
• Built-in “gate-in-motion” alarm for industrial applications
• Robust lightning protection, up to 20K Volts and 10K Amps on all inputs and outputs (35
channels) including loop detector input connections
• Two selectable 16 position safety obstruction sensors, auto adaptable to gate weight and size, for
independent control of open and close cycles
• Independent closing speeds for primary and secondary
• Dual motor overcurrent safety shut-off for additional protection
• Two 7amp batteries provides 500 cycles in case of power failure with three modes of battery
backup, open once, leave open or leave closed
• On-board three button station
• On-board UL reset button
To Next Page
Loading...
