16
3. Unfold the fl ipover (FIG. 16-1).
UNFOLDING FLIPOVER
FIG. 16-1
FIG. 16-2C
FIG. 16-2B
RAISING & LOWERING PLATFORM
FIG. 16-2A
4. Raise the platform (FIG. 16-2A) by pushing the toggle switch to the UP
position (FIG. 16-2B). Wait a second before releasing the toggle switch,
after platform reaches bed height. To lower the platform, push the toggle
switch to the DOWN position (FIG. 16-2C).
NOTE: While operating the Liftgate, release the toggle switch
to stop the platform.
OPERATION - Continued
FLIPOVER
To Next Page
Loading...
