Need help?Do you have a question about the Maxon TE-25 and is the answer not in the manual?
General| Type | Electric Chain Hoist |
|---|---|
| Capacity | 250 kg |
| Load Capacity | 250 kg |
| Lifting Height | 3 m |
| Protection Class | IP54 |
| Power Supply | 230 V, 50 Hz |
Use handle under platform to open.
Unhook chain from flipover handle and unfold.
Stow liftgate by tucking unit away under pressure.
Lower platform to ground and unfold.
Raise platform to bed height using control.
Load platform at ground level within edges.
Load at bed level, push load into vehicle.
Remove load, lower liftgate before moving vehicle.
Raise platform slightly and stow for transport.
Fold flipover and platform, secure flipover.
Fold platform against opener and raise to stowed position.
To Next Page
