Maxon TE-25 - Loading Platform at Bed Level

17
LOADING PLATFORM AT BED LEVEL
FIG. 17-1
INBOARD
EDGE
TRUCK
BODY
PLATFORM
7. Load the platform at bed level
(FIG. 17-1) as follows. Push
load out of the vehicle to cor-
rect position on the platform.
Place all loads as close as
possible to the inboard edge
of the platform with heaviest
part toward the truck body
as shown in FIG. 17-1. If
standing on platform with the
load, stand in the footprint
area shown and comply with
the WARNING at top of this
page.
Pulling the load from vehicle to platform
can result in a fall from platform and
serious injury. When unloading vehicle,
always push the load out on the platform.
WARNING
!
PLATFORM AT GROUND LEVEL
FIG. 17-2
8. Lower the platform to ground
level (FIG. 17-2). Move load off
the platform.
INBOARD
EDGE
PLATFORM