To Next PageTo Next Page
Need help?Do you have a question about the Maxon BMR-CS Series and is the answer not in the manual?
General| Brand | Maxon |
|---|---|
| Model | BMR-CS Series |
| Category | Lifting Systems |
| Language | English |
Describes ground-level controls for operating the liftgate, including raising, lowering, folding, and unfolding.
Details platform-level controls on the RH runner for raising and lowering the platform while riding it.
Explains how to use the power down button from the ground for lowering the platform.
Explains how to use the power down button from the platform for lowering it.
Details the master select switch for applying or removing battery power to the liftgate pumps.
Steps to lower and unfold the platform to prepare for vehicle loading.
Procedure to lower the platform to the ground for initial loading access.
Instructions to release and unfold the retention ramp on steel platforms.
Instructions to release and unfold the retention ramp on aluminium platforms.
Guidance on safely placing loads on the platform, considering weight distribution and limits.
Procedure for raising the platform and moving loads into the vehicle's cargo area.
Steps to unfold the platform to prepare for vehicle unloading.
Procedure to lower the platform to the ground after unloading.
Steps to raise the platform to bed height for unloading operations.
Guidance on safely positioning loads on the platform for removal from the vehicle.
Procedure for lowering the platform and removing loads from the vehicle.
Procedure to fold and secure the retention ramp for transport.
Steps to fold the platform into its transport position.
Engaging upper locking wedges to ensure the platform is safely secured.
Procedure for lowering the platform to align with dock level for loading/unloading.
Engaging upper locking wedges to secure the platform during dockside operations.
