18
OPENING THE PLATFORM
UNLOADING VEHICLE
LOWERING THE PLATFORM
FIG. 18-3
To lower platform to the ground,
use column switch as shown
in FIG. 18-3. Release toggle
switch when platform reaches
the ground.
Push column UP/DOWN toggle switch to
DOWN position (FIG. 18-1) to lower platform
(FIG. 18-2A) until runner arrow and column
decal are about even (FIG. 18-2B). Platform
will be released from the locking wedges on the
Liftgate column. Next, use column switches 1
and 2 to UNFOLD platform (FIG. 18-2A). Hold
both toggle switches until platform reaches the
unfolded (horizontal) position and then release
the switches.
FIG. 18-2A
COLUMN SWITCH
FIG. 18-1
DOWN
FIG. 18-2B
UNFOLD
COLUMN
SWITCH
COLUMN
DECAL
RUNNER
ARROW
1
2
DOWN
To Next Page
Loading...
