Maxon BMR-CS Series - LOWERING & UNLOADING PLATFORM

21
1. Use runner switch to lower platform
to the ground (FIG. 21-1). Release
switch when platform reaches
ground level.
Before lowering platform, make sure area surrounding platform is
clear of people and objects. If standing on platform, do not allow
your feet to extend beyond inboard edge of platform.
WARNING
!
2. Unfold retention ramp to
ramp position as follows:
LOWERING & UNLOADING PLATFORM
FIG. 21-1
FIG. 21-1A
RAMP
POSITION
INBOARD
EDGE
RUNNER
SWITCH
DOWN
ROTATE
LOCKS TO
RELEASE
STEEL
PLATFORM
FIG. 21-2
Push down on lock
mechanism and
lower retention ramp
to the ramp position
(FIG. 21-2).
ALUMINUM
PLATFORM
RAMP
POSITION
RETENTION
POSITION
LOCK
MECHANISM
Rotate locks (FIG.
21-1A) to release
retention ramp.
Unfold ramp to
ramp position (FIG.
21-1A).