26
1. Use column switch to lower (DOWN) platform
to lower locking position (FIGS. 26-1 & 26-1A).
Release switch when top edge of closed platform
is below bed height and resting on lower locking
wedges (FIG. 26-1A).
LOWER LOCKING POSITION
FIG. 26-1
Use dock plate for moving loads between dock and vehicle. Dock
plate must be supported by dock and vehicle fl oor. It must not
rest on Liftgate platform.
CAUTION
!
LOWER PLATFORM BELOW DOCK LEVEL
DOCK LOADING & UNLOADING
NOTE: Lower the platform and plat-
form railing before backing
vehicle to dock.
DOWN
FIG. 26-1A
LOCKING
WEDGES
To Next Page
Loading...
