24
1. Use the column switch to raise (UP)
platform (FIG. 24-1A) until runner arrow
and column decal on LH column are
aligned (FIG. 24-1B).
FIG. 24-1A
STOW PLATFORM
CAUTION
Platform and bottom stops could be damaged if platform is folded
with heel below the column bottom stops. Bottom stops will
interfere with folded platform being raised to up position. Prevent
damage by aligning arrow decals on column & runner before fold-
ing platform. Then, platform heel will be above the bottom stops.
UP
COLUMN
DECAL
RUNNER
ARROW
FIG. 24-1B
FIG. 24-2
2. Hold both column
switches 1 and 2 to FOLD
platform (FIG. 24-2).
FOLD
NOTE: The 2 platform fl ashing lights are fl ashing when platform is unfolding and
unfolded. The lights stop fl ashing when the platform is folded/stowed.
1
2
STOWING PLATFORM - Continued
To Next Page
Loading...
