Maxon TE-25 - Raising Platform to Bed Height

15
UNFOLDING FLIPOVER
FIG.15-1
LOWER
FIG. 15-2B
RAISE
FIG. 15-2A
RAISING & LOWERING PLATFORM
FIG. 15-2
4. Raise the platform (FIG. 15-2) by pushing the toggle switch to the
RAISE position (FIG. 15-2A). After the platform reaches bed height, wait
a second before releasing the toggle switch. To lower the platform, push
the toggle switch to the LOWER position (FIG. 15-2B).
3. Unhook chain from
handle on the fl ipover
(FIG. 15-1A). Use handle
(FIG. 15-1B) to unfold
the fl ipover (FIG. 15-1).
USING HANDLE
FIG. 15-1B
UNHOOKING CHAIN
FIG. 15-1A
FLIPOVER
CHAIN
HANDLE
HOOK
FLIPOVER
PLATFORM
CONTROL
SWITCH
NOTE: While operating the Liftgate, release toggle switch to
stop the platform.