18
LOADING PLATFORM AT BED LEVEL
FIG. 18-1
7. Load the platform at bed level
as follows. Push load out of the
vehicle to correct position on
the platform (FIG. 18-1).
Place all loads as close as
possible to the inboard edge
of the platform with heaviest
part toward the vehicle body
as shown in FIG. 18-1. If
standing on platform with the
load, stand in the footprint area
shown and comply with the
WARNING on the previous
page.
Pulling the load from vehicle to platform can result in a fall from
platform and cause serious injury. When unloading vehicle,
always push the load out on the platform.
WARNING
!
PLATFORM AT GROUND LEVEL
FIG. 18-2
8. Lower the platform to ground
level (FIG. 18-2). Move load
off the platform (FIG. 18-2).
OPERATION - Continued
PLATFORM
VEHICLE
BODY
INBOARD
EDGE
LOAD
PLATFORM
INBOARD
EDGE
LOAD
To Next Page
Loading...
