11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
22
PLATFORM TORSION SPRING ADJUSTMENT
1. Make sure vehicle is parked on level
ground. LOWER the Liftgate to the ground
and unfold platform only (FIG. 22-1).
NOTE: Perform the following adjustment if platform feels heavy as you start to
fold it for stowing. If adjusted as follows, the torsion springs will reduce the
amount of eff ort you need to start folding the platform.
UNFOLDING PLATFORM
FIG. 22-1
2. Measure the distance between the
bottom block of the platform and the
ground (FIG. 22-2).
PLATFORM 4” MAX ABOVE GROUND
FIG. 22-2
4” MAX
NOTE: A properly adjusted platform will
stay in position with the bottom
4” or less above the ground while
fl ipover is being folded. If distance
is more than 4”, and platform can
be folded and unfolded with ease,
the greater distance is allowed
and no adjustment is necessary.
Acceptable force to fold the
platform is 40 lb maximum.
PERIODIC MAINTENANCE - Continued
To Next Page
Loading...
