MAXPEEDINGRODS MXR-3M - Introduction

INTRODUCTION
01
1.1 Overview
Fig. 1
The main unit of this parking air heater (the
"heater") is a small, microprocessor-controlled,
fuel-burning furnace. Its heat exchanger is located
in a hood-shaped case with a separate air
passage. Cold air is sucked into this air passage by
the fan, and hot air blown out, forming a heating
system independent of the vehicle's original
heating system. In this way, a vehicle’s cab or
passenger compartment can be heated whether
or not the engine is running.A schematic diagram
is shown in Fig. 1.
PARKING AIR HEATER
05
Model : MXR-3M
PARKING AIR HEATER
06
1.2 Innovations
Constant temperature & intelligent frequency conversion
Flameout protection
Anti-electrophore function
Ignition tested in low temperature conditions, down to −40˚C
Bluetooth function (optional)
Automatic altitude adjustment
Pre-heating, de-misting windows
Heating and keeping warm the following :
– All kinds of automobiles and trailers
– Construction machinery
– Agricultural machinery
– Camper vans
– RVs
– Boats, ships,yachts
1.3 Purpose of Heater