8
Chapter 2 General Safety Information
3-General Safety Instructions
In order to ensure the safe operation and optimal performance of the
product, please follow these warning and cautions in additionto the other
contained elsewhere in this document.
1.Specular Reflection
There are often numerous secondary laser beams produced at various angles
in the output port of the laser. These divergent beams are produced when the
primary beam of laser reects off a smooth surface, and they are called specular
reflections. Although these secondary beams may be less powerful than the
total power emitted from the primary beam, the intensity may be great enough to
cause damage to the eyes and skin as well as surface of materials.
WARNING:
◎
You must exercise caution to avoid/minimize specular reflections as these
laser radiations are invisible!
2.Safety Instructions of Accessories
WARNING :
◎
This device has an output optical head connected to the laser with a fiber
cable. Please, be careful dealing with the output head.
3.Optical Operating Instructions
We strongly recommend that you read the following procedures before operating
the laser:
1.Never look directly into the laser output port when the power is turned on.
2.Avoid positioning the laser and all optical output components at eye level.
3.Ensure that all personal protective equipment is suitable for the output power
To Next Page
Loading...
Need help?
General
