MAXPhotonics MFS Series User Manual

14
Chapter 4
Specication
1-Characteristic Parameters
No. Type MFS-10T MFS-20T
1 Laser power 9±1W 19.5±0.5W
2 Central wavelength 1064nm
3 Beam quality M2 ＜ 1.4
4
Frenquency tunable
range
20-50khz 30-60khz
5
Marking Area
(Standard)
110(F=160MM)
6 Engraving Line Speed 0-15000mm/s
7 Mode for focusing Manual
8 Marking Speed 600-1000 characters/min
9 Min. Line Width 0.02mm
10 Min. Character 0.15mm
11 Repetition Accuracy ±0.002mm
12 Cooling Air Cooling
13 Working Environment Clean Room or Less dust room
14 Working Temperature 10-35℃
15 Power Consumption ≤ 120W ≤ 160W
16 Operation voltage AC220V±10%，50HZ

MAXPhotonics MFS Series Specifications

General

Brand	MAXPhotonics
Model	MFS Series
Category	Printer
Language	English