18
Chapter 5 Using Instruction
Definition of each interface:
1.Power Supply: 220V to 24V power adapter socket;
2.DB 15 Pins Interface:Scan head/Galvometer interface;
3.DB 26 Pins Interface:External Control IO interface of control card (more
denition about IO);
4.USB Interface: For USB upgarde the control card program interface and WiFi
interface;
5.External USB port: used for external computer and laser control system
connection port by USB cable (reserved);
6.DIP switch: used for internal USB interface and external USB interface
selection switching;;
7.Foot Switch Interface: use for foot switch/padel; turn ON, the laser emit, turn
OFF, no laser emit;
8.Microphone, audio interface;
9.Computer USB interface;
10.Computer network port, when the industrial computer is connected to the
network cable;
11.VGA interface, computer monitor interface;
12.HDMI interface, computer monitor interface;
13.Industrial computer power supply interface, the internal power of the laser
machine has been supplied, so this interface does not need to be used under
normal circumstances.
2-DB 26 Pins Interface Definition
1.Functions of each interface
To Next Page
Loading...
Need help?
General
