15
Chapter 2
shall be applied, including but not limited the laser safety signs and the
interlocking devices. Corresponding operators must be trained and
examined and know the normal safety specifications for operating the
laser.
Meanwhile, it is important that the output components shall not be installed
at eye level.
Because of interaction of the laser and the metal material, the radiation of
high-level ultraviolet light or visible light may be produced. Make sure that
the laser is provided with the protective cover to prevent the eyes or other
parts of human bodies from damage by radiation.
We recommend that you comply with the following operating
measures to prolong the service life of the laser:
（1）Do not expose the laser to a high moisture/high temperature
environment. Install the laser in the cabinet with the function of
temperature-humidity control and dust-free.
（2）Operation at higher temperature will accelerate aging, increase
threshold current and lower slop efficiency. If the device is overheated,
stop operation and contact Maxphotonics.
Caution:
◎ Exercise caution to avoid damage to the device.
◎ If the laser will be in an environment of less than 0 degrees Celsius,
drain all coolant out of laser completely to prevent damage to the laser.
To Next Page
Loading...