Chapter 6
33
Cleaning protective lens with swabs
IMPORTANT：
◎ Do not reuse a lint-free optical wipe or swab.
◎ 2)Do not touch the protective lens of the fiber connector.
◎ Do not blow directly, or else new dirty will be brought.
◎ Do not touch the tip of the cleaning swab with your fingers and use
each swab only once.
◎ Cleaning is necessary before place the protective cover and sleeve.
Never blow air directly at the surface, because you could imbed
contaminants into the surface. Always blow across the surface!
◎ If the fiber connector could not be installed in optical system
immediately, please cover it with the protective cap cleaned with
compressed air.
To Next Page
Loading...