EasyManua.ls Logo

MAXPhotonics X1-MFSC-1500W - More Safety Information

MAXPhotonics X1-MFSC-1500W
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Chapter 2 General Safety Information
◎ The filter at the bottom of the laser needs to remove dust and dirt from the
air inlet from time to time.
7-More Safety Information
If you need more laser safety information, please refer to:
Laser Institute of America (LIA)
13501 Ingenuity Drive, Suite 128
Orlando, Florida 32826
Phone: 407 380 1553, Fax: 407 380 5588
Toll Free: 1 800 34 LASER
American National Standards Institute
ANSI Z136.1, American National Standard for the Safe Use of Lasers
(Available through LIA)
International Electro-technical Commission
IEC 60825-1, Edition 1.2
Center for Devices and Radiological Health
21 CFR 1040.10 - Performance Standards for Light-Emitting Products
US Department of Labor - OSHA
Publication 8-1.7 - Guidelines for Laser Safety and Hazard Assessment.
Laser Safety Equipment
Laurin Publishing
Laser safety equipment and Buyer’s Guides

Related product manuals