MaxPower Sunbridge 2000 - Page 12

10
12.5V
12.8V
Available options in SUNBRIDGE 2000 model:
22.0V
22.5V
23.0V (default)
23.5V
24.0V
24.5V
25.0V
25.5V
11
Setting voltage
point back to
battery mode when
selecting “SBU
priority” or “Solar
first” in program 07.
Available options in SUNBRIDGE 1000 model:
Battery fully
charged
12.0V
12.3V
12.5V
12.8V
13.0V
13.3V
13.5V (default)
13.8V
14.0V
Available options in SUNBRIDGE 2000 model:
Battery fully
charged
24V
24.5V
25V
25.5V
26V
26.5V
27V (default)
27.5V
28V
12
Charger source
priority:
To configure
charger source
priority
If this inverter/charger is working in Line, Standby or Fault mode, charger
source can be programmed as below:
Utility first
Utility will charge battery as first priority.
Solar energy will charge battery only when utility power
is not available.