5
Built-in Controller
The Recurve can be controlled directly with the built-in controller. The built-in controller
integrated in the Recurve features an OLED monitor and a control dial, from which user can
setup all the functions for the fixture.
Standard or Master/Slave Mode
Supporse there are 2 or more units of Recurve fixtures, user can connect them together
through the Master/Slave mode to control them simultanousely - all Slave fixtures will follow
the settings programmed on the Master fixture, saving time and effort on setting up multiple
fixtures.
Control with iOS or Android Devices (Optional)
The Recurve can also be wirelessly connected to an ICV6 controller (sold separately), which
allows the Recuve fixtures to be controlled by iOS or Android devices through the Syna-G
System.
To Next Page
Loading...
Need help?
General
