866.4.Maxtec www.maxtec.com III
TABLE OF CONTENTS
CLASSIFICATION, WARRANTY ..................................... I
WARNINGS, CAUTION ...........................................II
1.0 INTRODUCTION.............................................1
1.1 Component Identification .........................................1
1.2 Symbol Guide ..................................................2
1.3 Description ....................................................2
2.0 CALIBRATING THE HANDI+ ....................................2
2.1 Before you begin................................................2
2.2 Calibrating the HANDI+ Oxygen Analyzer .............................3
2.3 In-Line Calibration (Configuration A) .................................3
2.4 Direct Flow Calibration (Configuration B) ..............................4
3.0 OPERATING THE HANDI+ .....................................4
4.0 FACTORS INFLUENCING ACCURATE READINGS .....................5
4.1 Elevation Changes...............................................5
4.2 Temperature Effects .............................................5
4.3 Pressure Effect .................................................5
4.4 Humidity Effect.................................................6
5.0 CALIBRATION ERRORS AND ERROR CODES ........................6
6.0 CLEANING AND MAINTENANCE .................................7
7.0 SPECIFICATIONS ............................................7
7.1 Analyzer Specifications ...........................................7
7.2 Effect of Interferent Gases and Vapors................................8
8.0 HANDI+ SPARE PARTS AND ACCESSORIES ........................8
8.1 Standard Replacement Parts and Accessories..........................8
9.0 FREQUENTLY ASKED QUESTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
To Next Page
Loading...
Need help?
General
