866.4.Maxtec www.maxtec.com2
1.2 Symbol Guide
The following symbols and safety labels are found on the the Handi+:
1.3 Description
The Maxtec Handi+ oxygen analyzer is designed to monitor oxygen
concentration in the patient-breathing environment. It is one of a full line of
oxygen analyzers by Maxtec. The Handi+ oxygen analyzer utilizes the Maxtec
MAX-250 oxygen sensor and is engineered for fast response, maximum
reliability and stable performance. The Handi+ is designed primarily for spot-
checking of oxygen levels delivered by medical oxygen delivery equipment and
respiratory care systems. Its lightweight, compact size, extended battery life,
and "auto off" feature makes this oxygen analyzer ideal for portable oxygen
analysis by qualified heath care professionals.
2.0 CALIBRATING THE Handi+
2.1 Before You Begin
A protective film covering the threaded sensor face must be removed and the
sensor allowed to “breath” for at least 30 minutes. Next, the Handi+ Oxygen
Analyzer should be calibrated. Thereafter, Maxtec recommends calibration on
a weekly basis. However, more frequent calibration will not adversely affect
product performance.
Do not throw away. Follow local
guidelines for disposal.
Follow instructions for use
On/off Button
Do Not
Warnings
Calibration Button
Meets ETL standards
EC REP
Authorized Representative
in the European Community
LOT
IPX1
Lot code/Batch code
Drip Proof
SN
Serial Number
REF
Catalog Number
Manufacturer
Federal law (USA) restricts this device
to sale by or on the order of a physician.
Contains acid
Contains lead
only
To Next Page
Loading...
Need help?
General
