EasyManua.ls Logo

MAXTEK 77429 - Inactive Standby

MAXTEK 77429
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
System
Backlight - Dim Level
Dim level is the brightness of the display when the radio has timed
out i.e. no buttons pressed (unless ‘On’ has been selected in the
timeout options). Once in the Backlight sub menu list, press the
tune +/- button repeatedly until you get to ‘Dim Level’ and then press
the dial to set this feature.
In this sub menu you can choose from the following:
High > Med > Low
The asterisk in the top right indicates the current setting.
Press ‘Menu’ a few times to exit this menu option to the radio.
Inactive Standby
This option will allow you to set the length of time in hours before the
radio turns off. Once in the system menu press the tune +/- button
repeatedly until you get to ‘Inactive Standby’ and then press the dial
to select this feature.
Select the amount of time required by using the tune +/- button to
cycle through the available options and press the dial to conrm.
Your Inactive Standby options are:
OFF > 2 > 4 > 5 > 6 (Hours)
The asterisk in the top right indicates the current setting.
Press ‘Menu’ a few times to exit this menu option to the radio.

Related product manuals