MaxVac DV20-MB - Page 12

ENGLISH DEUTSCH NEDERLAND FRANÇAIS ESPAÑOLITALIANO
MAX-VAC.COMMAX-VAC.COM DV 20
|
35
|
50 MBDV 20
|
35
|
50 MB
23
22
OFF
ON
CONNECTING A POWER TOOL TO
THE VACUUM CLEANER
Plug the power tool into the socket on the Motor unit (A)
Plug the vacuum into the power supply (B).
The power socket is suitable for connection of electric tools with a maximum
permitted power as indicated on page 12 - Technical Data
NEVER plug in power tools with a higher rating
NEVER plug more that one power tool into the socket on the motor unit
Plug in the power tool, then the vacuum. With the cable clamp, x the cable of the
electric power tool to the exible hose.
Turn on the appliance.
TO USE A POWER TOOL
WITH THE VACUUM
The lter cartridge should
always be attached. Remove
the foam lter if installed.
Always keep the lter system in good
working order to ensure efcient
operation. We recommend cleaning the
lter cartridge frequently as illustrated
on Page 26
Attach the connector of the exible hose
(U) to the air inlet connector (R).
ATTACHING THE FLEXIBLE
HOSE
R
U