ENGLISH DEUTSCH NEDERLAND FRANÇAIS ESPAÑOLITALIANO
MAX-VAC.COMMAX-VAC.COM DV 20
|
35
|
50 MBDV 20
|
35
|
50 MB
25
24
R
U
U
Insert the sleeve of the exible hose in the air inlet connector (R) and the adapter
(U) in the dust conveyor of the electric power tool.
Plug in the power tool, then the vacuum. With the cable clamp, x the cable of the
electric power tool to the exible hose.
Turn on the appliance.
MAINTENANCE
Always unplug the appliance from the power supply before
cleaning or servicing the lter system in any way.
FILTER CARTRIDGE
To manually start the “Self-cleaning lter”
function, press the orange switch (E) for
maximum 15÷20 seconds.
Then release the switch (E) for 15 seconds;
the coil must cool down.
The coil that activates the “Self-Cleaning
lter” system is tted with a thermal
protection switch.
Continuous system operation for more
than 60 seconds may cause the thermal
protection switch to trip.
The system resets after about 20 minutes.
Switch "A" to "MANUAL"= Self-cleaning
Filter function not active (see page 20)
OF
E
B
To Next Page
Loading...