ENGLISH DEUTSCH NEDERLAND FRANÇAIS ESPAÑOLITALIANO
MAX-VAC.COMMAX-VAC.COM DV 20
|
35
|
50 MBDV 20
|
35
|
50 MB
27
26
To thoroughly clean the lter cartridge
wash it as shown in gure.
Before putting the lter cartridge back
on, make sure it is completely dry.
Replace the lter cartridge only if worn.
Dispose of the lter element in
compliance with the special waste
disposal regulations in force in the
various countries.
The lter element may only be cleaned
and washed when generic and not
Class ‘M’ dust has been vacuumed.
Handle the lter cartridge
carefully when wet.
Do not use a lter that has been washed to vacuum Class ‘M’ dust.
CLEANING THE DRUM
After vacuuming liquids, empty the
drum and rinse it together with the
accessories in order to prevent scale
from forming.
Frequently wash the seat where the
safety oat slides in order to ensure it's
properly functioning.
Before vacuuming Class ‘M’ dust again
make sure that the lter element and the
bag are tted.
Wash the drum after each use.
MODEL DV50 ONLY
K
5¡
Open the liquid discharge tap (K). In order to completely empty the container bin tip
it 5° as shown in the diagram.
To Next Page
Loading...