To Next PageTo Next PageWhat to do if my Maxx Cold Freezer is unfreezing?
If your Maxx Cold Freezer is unfreezing, it could be due to several reasons. First, check if the temperature control is set too high and adjust it accordingly. Next, ensure the plug is securely connected to the outlet. Lastly, inspect the fuse or breaker and replace or reset it if necessary.
Why is my Maxx Cold Freezer compressor always running?
Your Maxx Cold Freezer's compressor might run continuously because the temperature control is set too low, there's too much product stored inside, thick frost has accumulated, the lid is open too often or for too long, the unit is too close to the wall (needs 4" clearance), or it's near a heat source or in direct sunlight. Adjust the temperature control, reduce the quantity of stored product, defrost the freezer, limit how often and how long the lid is open, reposition the unit away from the wall, or move it away from any heat sources.
How to fix a noisy Maxx Cold Freezer?
If your Maxx Cold Freezer is making a lot of noise, it could be because the ground isn't flat, causing the unit to vibrate. Try moving it to a flat surface. Another cause could be that the refrigerant lines are connected or too close together; in this case, separate the refrigerant lines.
General| Brand | Maxx Cold |
|---|---|
| Model | MXDC-12 |
| Exterior Material | Stainless Steel |
| Weight | 150 lbs |
| Refrigerant | R290 |
| Defrost Type | Automatic |
| Energy Star Certified | No |
| Door Hinge | Right |
| Capacity | 12 Cu. Ft. |
| Interior Material | Aluminum |
| Power Supply | 115V/60Hz |
General directives and preparation steps before installing the canopy.
Instructions for assembling the fixed strips using connectors and bolts.
Steps to install the assembled fixed strips onto the freezer frame.
