Why are the ice cubes incomplete when being dumped in my Maxx Ice Ice Maker?
If the ice cubes are incomplete when being dumped from your Maxx Ice Ice Maker, clean the sprinkler because it may be blocked.
What to do if my Maxx Ice Ice Maker makes ice, but the bin doesn't fill up?
If your Maxx Ice Ice Maker makes ice, but the bin does not fill up, consider these potential issues: * The condenser may be dirty, requiring cleaning. * The bin drain might be partially restricted; clean it out and check the installation. * Airflow to the ice maker may be obstructed; check the installation. * Poor hot gas valve performance can lead to reduced ice production; replace the hot gas valve. * A partially clogged sprinkler can reduce ice production; clean the sprinkler. * Spraying of the small nozzle may be blocked by the ice slideway; adjust the location of the ice slideway. * Poor water quality can block the water line, reducing sprinkler pressure; install a filter apparatus in front of the water inlet valve. * High ambient and water temperatures, or proximity ...
Key safety precautions to reduce risks of fire, electrical shock, or injury.
Guidance on selecting a suitable area and ensuring proper ventilation for the ice maker.
Details on proper grounding, circuit requirements, and outlet specifications.
Instructions for connecting the water inlet and drain lines according to plumbing codes.
A comprehensive checklist to ensure the ice maker is ready for use after installation.
A guide to identifying and correcting common problems with the ice maker.
General| Voltage | 115V |
|---|---|
| Cooling Type | Air-Cooled |
| Frequency | 60 Hz |
| Water Supply | Manual Fill |
| Ice Shape | Bullet |
To Next Page
