EasyManua.ls Logo

Maxx Ice MIM452 - Page 8

Maxx Ice MIM452
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
float valve until the water level in the trough closes the valve. During the icemaking stage, water is
pumped from the water trough to the water distribution tube. The distributed water flows over the
surface of the cold evaporator where the purest water is converted to ice. The unfrozen water
returning to the trough. At the end of freeze cycle and during harvest, the water dump valve is
opened and the mineral laden remaining water is pumped down the drain.

Related product manuals