3. Yellow LED: Ice harvest indicator light.
When this LED is lit, the unit is working in the ice harvest mode controlled by ice-full probe .
When green LED and yellow LED is lit, it means the unit is working in the cold preservation stage .
4. Mode button:
Mainly for service. When this button is pressed, it can change from ice making mode to ice harvest
mode, or from ice harvest mode to ice making mode. You can judge the mode from the status of the
green and yellow LEDs.
Ice Size Adjustment Guide:
1. Press and hold the “Clean” button and the “Mode” button together for at least 3 seconds. The
unit will enter the Ice Size Adjustment mode. The “HARVEST” LED (yellow) will be blinking
continuously during the ice size adjustment.
2. While in the Ice Size Adjustment mode, press the “Clean” button or the “Mode” button for the
desired ice size.
Smaller ice setting:
By pressing the “Clean” button, you can decrease the size of the ice cubes. The “ICE” LED
(green) will flash as you lower the ice size and will finally be blinking at the setting of smallest
ice size.
Larger ice setting:
By pressing the “Mode” button, you can increase the size of the ice cubes. The “BIN FULL”
LED (red) will flash as the larger size is set and will blink when the setting of largest ice size
has been reached.
After 10 seconds without any operation, the unit will return to the previous mode.
NOTE: During the ice size adjustment, the “BIN FULL”, “ICE” and “HARVEST” LEDS
blinking all at once indicate that the unit is in the default factory setting of the ice size.
MAJOR FUNCTIONS
1. The operating procedure is completely automatic.
2. When the ice storage bin is full of ice cubes，the machine stops making ice and proceeds to the
cold preservation stage automatically. It starts making ice again after ice cubes are removed.
3. The different colors of the LED display indicate various work modes.
4. The fan motor responds to the ambient temperature. If it is cold, the motor will stop working to
keep the cooling system in good working condition.
5. A sensitive probe and accurate timer enhance the performance of the ice maker.
6. A compressor protection system is built in.
To Next Page
Loading...