Maxx MIM-50 - Replace the Water Pump; Replace the Compressor

15
Problem
kinds
Check part
or point
Possible Cause
Probable Correction
The body
is
electrified
Earth line
The earth line isn't in
the socket.
Please use the socket meeting
the standard.
Lines
The lines are
creepage.
Adjust, reconnect /replace lines
Electric
component
The electric
component is
creepage,
Replace this electric
component.
Scales
occur
frequently
inside the
machine
the water
quality
The rigidity of the
water quality is too
high.
Using a water-soften apparatus
installed in front of the water
inlet.
Noise
during
operation
is big
Spring of the
internal
compressor
The spring of the
internal compressor
drops.
Replace the compressor.
Water pump
The noise of the water
pump
Replace the water pump.
Pipeline
system
Pipeline system
resonate
Clear pipeline system
Feet
The feet are not
leveled
Level and lock the feet.
Fan motor
The fan motor loose,
the clearance of the
rotor is bigger, the fan
blade turns back
Relocate the fan motor /
replace
Problem
kinds
Check part
or point
Possible Cause
Probable Correction
Water is
leaking out
the unit
The operation
A few water drops to
the floor when you
open the door to take
out ice from ice
storage bin.
Normal condensation on the
door or some water together
with ice. Take care when you
take out ice.
Water supply
connection
Water supply
connection leaking.
Tighten fitting.
Drainage tray
on top of the
compressor
Water full probe is out
of function
Replace the new one.
Water line
Some water line leaks.
Plug into again.
The water
distributio
Lines of the
water pump
The lines of the water
pump loose.
Plug into again
Water pump
Water pump damages
Replace water pump.
Water
distribution
tube
The water distribution
tube blocks
Clean the water distribution
tube