Maxxair MAXXFAN MINI PLUS Series User Manual

MAXXAIR
MAXXFAN MINI PLUS & DELUXE
with WALL CONTROLS
INSTALLATION INSTRUCTIONS,
INFORMATION AND OPERATING GUIDE
FOR MAXXFAN MINI MODELS 3802, 3852,
3803, 3853, 3804, 3854
READ AND SAVE THESE INSTRUCTIONS
NOTE: Refer to Installation Instructions,
Information and Operation Guides
regarding the model you have
purchased.
The MAXXFAN MINI / MINI Plus / MINI
Deluxe installs into a standard RV roof
opening of 14 by 14 inches.
To determine if your roof opening is
correctly sized, simply remove the
interior ceiling garnish trim ring of your
existing roof vent and measure the
ceiling opening or verify the opening is
large enough by sliding the MAXXFAN
MINI / MINI Plus / MINI Deluxe sleeve
into the opening.
The MAXXFAN MINI / MINI Plus / MINI
Deluxe is designed for a minimum roof
thickness of 1 inch to a maximum of 4
1/2 inches.
The MAXXFAN MINI / MINI Plus / MINI
Deluxe requires a minimum 12 Volt DC,
2 amp service. Confirm that the circuit
you intend to use will accommodate the
additional load. Circuit must be fused
and use appropriate gauge stranded
wire for electrical connections.
P/N: 11A90030Z 08-2019

Maxxair MAXXFAN MINI PLUS Series Specifications

General

Brand	Maxxair
Model	MAXXFAN MINI PLUS Series
Category	Air Conditioner
Language	English

Summary

MAXXFAN MINI Installation and Requirements

Installation and Electrical Requirements

Details roof opening size, thickness, and electrical service needs for MAXXFAN MINI installation.

MAXXFAN MINI Installation Instructions

Safety Warnings and Precautions

Highlights critical safety information, including fire, electric shock, and proper usage warnings.

Roof Opening Preparation

Steps for preparing the roof opening, including sealant removal, measuring, and sleeve cutting.

MAXXFAN MINI Installation Steps

Sealant Compatibility and Power Disconnection

Advises on compatible sealants and the necessity of disconnecting main vehicle power.

Attaching the Hood and Sealing

Guidance on installing the hood, attaching it to the roof, and sealing screw heads.

Electrical Connections and Wiring

Instructions for connecting 12VDC power supply wires and routing RJ45 cables.

Completing Installation and Operation

Securing Interior Plate and Wall Control Installation

Details on securing the interior plate and installing the wall control unit.

Finalizing Installation and Power Connection

Steps to reconnect main vehicle power and complete the installation process.

Operating the MAXXFAN MINI

Basic operation of the fan, LED lighting, and motion sensor features.

User Servicing Instructions

Guidelines for cleaning the MAXXFAN MINI unit safely.

MAXXFAN Wall Control Operation

MAXXAIR 3852 Wall Control Operation

Explains the functionality of the 3852 model wall control for fan and power.

MAXXAIR 3853 Wall Control Operation

Details the operations for the 3853 model, including fan and light controls.

MAXXAIR 3854 Wall Control Operation

Describes the 3854 model's controls for fan, light, and motion sensor.