Maxxhaul 80401 User Manual

Read and understand this entire manual before assembling,
installing, operating, or servicing this product.
SAVE THIS MANUAL
Copyright
c
2017 by MAXXHAUL. All rights reserved. No portion of this manual or any artwork contained
herein may be reproduced in any shape or form without the express written consent of MAXXHAUL. Due
to continuing improvements, actual product may di󰀨er slightly from the product described herein. Tools
required for assembly and maintenance may not be included.
Instruction Manual
&
Parts List
Aluminum
Wheel Cleaning Stand
Model 80401

Maxxhaul 80401 Specifications

General

Product Name	Maxxhaul 80401
Category	Automobile Accessories
Weight Capacity	500 lbs
Material	Steel
Receiver Size	2 inches
Quantity	1
Safe Work Load	500 lbs
Type	Cargo Carrier
Finish	Powder Coated

Summary

MAXXHAUL Aluminum Wheel Cleaning Stand Model 80401

Important Safety Information

Definition of Symbols

Explains hazard alert symbols used to convey potential injury risks and warnings.

Important Safety Instructions

Provides critical instructions to read and understand for safe operation, preventing injury or death.

Personal and Work Area Safety

Details safety precautions for the user, work environment, and proper attire during operation.

Use of the Aluminum Wheel Cleaning Stand

Product Modification and Purpose

Advises against modifying the product and clarifies its intended use for wheel cleaning.

Motorcycle Placement and Stability

Guides on safely positioning and stabilizing the motorcycle on the stand.

Weight Capacity and Chock Use

Specifies maximum weight limits and the necessity of using wheel chocks.

Setting Up and Using the Aluminum Wheel Cleaning Stand

Pre-operation Safety Checks

Emphasizes reading safety warnings and ensuring a safe, clean work area before setup.

Rear Wheel Setup Procedure

Step-by-step guide for positioning the stand and rolling the rear motorcycle wheel onto it.

Motorcycle Securing and Stability Check

Details on activating the side stand and using chocks for motorcycle stability.

Front Wheel Setup Procedure

Instructions for setting up the stand for front wheel cleaning and maintenance.

Work Completion and Removal

Procedure for safely removing the motorcycle from the cleaning stand after work.

Maintaining the Wheel Cleaning Stand

Pre-use Inspection

Check general condition, tighten hardware, and ensure no structural damage before each use.

Handling Damaged Product

Instructions to not use if damaged and to replace rather than repair.

Cleaning and Grease Removal

Guidance on keeping the product clean and free of grease for optimal performance.