8
Carefully unpack all delivered parts. Have someone there to help you as some of the training device parts are
bulky and heavy.
Check that all the parts and xing materials (screws, nuts, etc.) have been delivered.
Assemble the parts carefully as any damages or defects occurring due to mistakes made at the tim e of assem-
bly are not covered by the warranty or guarantee. Therefore, read through the assembly instructions carefully
before you start assembling, follow each assembly step exactly as described and keep to the correct sequence
of assembly as instructed.
Assembly of the training device must be carried out thoroughly by an adult pe rson only.
Assemble the training device in a location which is level, clean and clear of obstructions. 2 people are required
to carry out the as sembly.
Please be aware a possible risk o injury at the time o assembly and at each time o using this device exists.
For this reason, always be careful and thorough in your actions when assembling this device.
Make sure that the parts necessary for each stage of assembly are only hand tightened together and only tight-
en parts completely when all parts have been tted together perectly.
Training can only start when the training device has been fully assembled.
Assembly step 1
Assembly
To Next Page
Loading...
Need help?
General
