max_mustermann
max@mustermann.de
Email/Phone
Password
RunMAXX 6.3
Cockpit
24
Fitness training with the FitShow App
The cockpit is tted with a Bluetooth receiver as standard. Download the Fitshow App on a dedicated smart-
phone or tablet PC. To do this, scan the QR code on the back of this manual.
Step 1: Download the “FitShow” App from the App Store / Play Store and install it on your smartphone
or tablet PC.
Step 2: Register with FitShow. Please use a valid e-mail address, as you will receive a conrmation
code by e-mail.
Step 3: Make sure the treadmill is on and then go to “Indoor” at the top of the app selection and press
“Search”. The treadmill will now be displayed. Once you have selected your treadmill,
you have full access to the app.
Note:
Please note that we only provide the basis to use the device with an App. If you have any questions about using
the app and / or the Smartphone or tablet PC you are using, please contact the respective provider directly.
Play an audio source
Connecting an external audio source via the MP3 jack connection
It is possible to connect and play external audio sources (MP3 player, smartphone, etc) by connecting the
delivered audio cable (3.5mm jack plug) to the connection located on the front of the training device cockpit. It is
necessary for the external device to have a compatible connection for this cable.
Once the external music source has been connected and playback started on the external source, the music or
audiobook etc will be played over the cockpit speakers.
CAUTION:
In this type of audio playback, the controls such as volume, start, pause, etc can only take place at the external
audio source, e.g. on the smartphone. It is not possible to control these functions on the cockpit!
To Next Page
Loading...
Need help?
General
