MayPole MP7414 User Manual

1
Model No. Rated Input EN Rated Output
Peak
Output
Battery
Capacity
MP7414 230V AC 50Hz 48W 12V DC 2.8 Amp 4 Amp 12 - 48 Ah
MP7416 230V AC 50Hz 75W 12V DC 4.2 Amp 6 Amp 20 - 80 Ah
In order to ensure correct and safe usage of your battery charger, you should read
these instructions carefully. Please store these instructions for future reference.
SAFETY
Ensure that cables are regularly inspected and kept in good condition.
Never use the battery charger if the mains lead or plug is damaged.
Never use the battery charger if the output leads or crocodile clips are damaged.
Never use the battery charger if it has been dropped or damaged in any way.
WARNING: Battery charging produces explosive gases. Prevent flames and sparks.
Provide adequate ventilation during charging.
Do not leave charging batteries unattended for long periods or overnight.
Do not operate the charger above its rated output for long periods.
Monitor charging to ensure that a decreasing level of charge is occurring.
Electrical repairs or replacement of the mains cable should only be carried out by the
manufacturer, its service agent or a suitably qualified electrician / electrical technician in
order to avoid a hazard.
GENERAL SAFETY
This battery charger can be used by children aged from 8 years and above, and persons
with reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children must not play with this battery charger.
Cleaning and user maintenance shall not be carried out by children without supervision.
GASES
The charging process produces flammable and explosive gases - the area in which charging
takes place should be kept well ventilated. Only connect and disconnect the battery leads
when the mains supply is disconnected. Avoid flames or sparks! Do not smoke!

MayPole MP7414 Specifications

General

Brand	MayPole
Model	MP7414
Category	Battery Charger
Language	English

Summary

Safety Precautions

General Safety Guidelines

Covers safe usage by children, persons with reduced capabilities, and general handling.

Gases and Ventilation

Highlights explosive gases produced during charging and the need for ventilation.

Battery Charger Operation

Types of Batteries Supported

Specifies compatibility with Lead Acid batteries and exclusion of others.

Points to Note

Storage, indoor use, and restrictions on opening or user repair.

Danger Warnings

Advises on safety goggles, gloves, and handling of battery electrolyte.

Preparation for Charging

Ensures charging in ventilated area and battery disconnection from vehicle.

Battery Preparation

Checking liquid levels and topping up with distilled water.

Battery Connection

Procedure for connecting leads to battery terminals and vehicle chassis.

Charging Process

Instructions on connecting to mains, observing charge rate, and warnings.

Electrolyte Check

Guidance on checking specific gravity using a hydrometer.

Completion of Charging

Steps for disconnecting the charger and checking battery fluid levels.

Car Battery Maintenance

Importance of regular charging, especially in winter.

Faulty Cells Diagnosis

Identifying a faulty cell using hydrometer readings.

Care and Troubleshooting

Battery Terminal Care

Maintaining clean and tight battery lead connections.

Electrolyte Level Maintenance

Keeping electrolyte levels correct and using appropriate water.

Checking Non-Sealed Batteries

Using a hydrometer to check electrolyte specific gravity.

Simple Faults and Solutions

Troubleshooting steps for charger failure or non-operation.

Declaration of Conformity