3-5
Sensor Dry Preset Cycle Settings
Sensor Dry Cycles
Load Type
Temperature
HEAVY DUTY
Heavyweight mixed loads, cottons,
j
eans
High
N
ORMAL
Cordu
roys, work clothes
Medium
WRINKLE CONTROL
B
usiness casual clothes, permanent
press, synthetics
L
ow
D
ELICATE
Lingerie, blouses, washable knit
f
abrics
Extra-Low
Timed Cycles
Use Timed Cycles to select a specific amount
of drying time and a drying temperature. When
a Timed Cycle is selected, the Estimated Time
Remaining display shows the actual time
remaining in your cycle. You can change the
actual time in the cycle by pressing the Timed
Cycle Adjust up or down arrows. See “Chang-
ing
Cycles, Modifiers and Options,” page 3-7.
NOTE: Timed Cycles may also be used with
t
he dryer rack. See “Drying Rack Option,”
page 3-7.
TIMED DR
Y
Use this cycle to complete drying if items are
still damp after a Sensor Dry Cycle. Timed Dry
is also useful for drying heavyweight and bulky
items, such as bedspreads and work clothes.
Lightweight
garments, such as exercise wear,
can be dried using Timed Dry on a low tem-
perature setting.
RAPID DR
Y
Use this cycle for drying small loads or loads
that need a short drying time.
FRESHEN UP
U
se this cycle to help smooth out wrinkles from
such items as clothes packed in a suitcase or
items wrinkled from being left in the dryer too
long.
Timed Preset Cycle Settings
Timed Cycles
Load T
ype
Default
T
emperature
D
efault Time
(Minutes)
TIMED DRY
H
eavyweight, bulky items,
w
ork clothes
High 40
RAPID DRY
Small loads
M
edium 24
FRESHEN UP
Helps to smooth out
wrinkles
M
edium 20
MODIFIERS
SENSOR DRY CYCLE MODIFIERS
Use the Dryness Modifier to select dryness
levels for the Sensor Dry Cycles. Press DRY-
NESS
until the desired Dryness setting illumi-
nates.
The
preset dryness setting is Normal when
an Sensor Dry Cycle is selected. You can
select a different dryness level, depending on
the load, by pressing Dryness and choosing
More, Normal, Less or Damp. Selecting More,
Normal, Less or Damp automatically adjusts
the dryness level at which the dryer will shut
off. Once a dryness level is set, it cannot be
changed without stopping the cycle.
N
OTE: Dryness Level selections cannot be
used with the Timed Cycles.
TIMED CYCLE MODIFIERS
U
se the Temperature Modifier to select tempera-
tures for the Timed Cycles. Press Temp until
the desired temperature setting illuminates.
N
OTE: Temperature modifiers cannot be used
with the Sensor Dry Cycles.