To Next PageTo Next Page
Need help?Do you have a question about the Maytag MAH8700AW* and is the answer not in the manual?
General| Brand | Maytag |
|---|---|
| Model Number | MAH8700AW* |
| Spin Speed | 1200 RPM |
| Energy Star Certified | Yes |
| Color | White |
| Wash Cycles | 10 |
| Voltage | 120V |
| Loading Type | Front Load |
| Temperature Settings | Hot, Warm, Cold |
| Width | 27 in. |
| Agitator | No |
Identifies the specific model of the washing machine being serviced.
Provides crucial safety and responsibility notices for technicians and users.
Lists contact information for Maytag customer support.
Explains the meaning of safety symbols, words, and labels used in the manual.
Provides an overview of the service manual's scope and intended audience.
Details proper grounding and polarization for electrical outlets.
Outlines essential instructions and warnings regarding proper appliance grounding.
Guides users on how to find and record model and serial number information.
Provides information on locating authorized technicians and obtaining service.
Lists how to order replacement parts and accessories for the washer.
Explains the meaning of the model number coding system used by Maytag.
Lists common causes and checks for a washer that fails to start.
Provides troubleshooting steps for identifying and resolving leaks.
Offers solutions for when the washer's drum does not tumble.
Details checks and procedures for a washer that fails to spin.
Outlines troubleshooting for issues related to the washer not filling with water.
Addresses problems with incorrect water temperatures during cycles.
Guides on diagnosing and fixing excessive noise or vibration issues.
Explains how to access and use the diagnostic service mode.
Details specific diagnostic codes, their triggers, and recommended actions.
Provides testing procedures and expected results for the thermistor.
Details how to test the door switch and its expected resistance.
Outlines voltage checks for the water sensor at specific connection points.
Provides resistance values for testing motor windings.
Specifies voltage checks for the drain pump during a drain cycle.
Lists resistance checks for the hot and cold water valves.
Details voltage checks for the heater relay during water heating.
Specifies voltage checks for AC power supply to the control board.
Provides resistance testing for the reactor component.
Step-by-step instructions for removing the top cover of the washer.
Guides on how to remove and disconnect the water level sensor.
Instructions for safely removing the reactor component.
Details the process for removing the EMI filter, including noting wire locations.
Step-by-step guide to removing the water inlet valves.
Instructions for removing the detergent dispenser drawer.
Guides on how to remove the control console assembly.
Provides steps for removing the washer door from the front panel.
Detailed steps for removing the front panel of the washer.
Instructions for removing the rubber door boot seal.
Step-by-step guide for removing the heating element.
Detailed instructions for removing the drive motor.
Step-by-step guide for removing the drain pump assembly.
Comprehensive instructions for removing the outer tub and spinner.
Provides detailed steps for installing the high-efficiency washer.
Instructions for preparing the washer before installation, including removing shipping bolts.
Guidance on selecting an appropriate location for the washer.
Introduces safety guidelines and emphasizes caution during operation.
Explains the meaning of safety symbols, words, and labels used in the manual.
Provides guidance on properly loading the washer to ensure efficient cleaning.
Outlines the basic steps for starting and operating the washing machine.
Explains how to select the appropriate wash cycle for different loads.
Guides on selecting water temperatures for wash and rinse cycles.
Details how to select the appropriate spin speed for different fabric types.
Explains how to select the soil level to adjust washing time.
Guides on selecting additional cycle options like Delay and Chime.
Shows the estimated remaining cycle time on the display.
Explains the function of various indicator lights on the control panel.
Describes the IntelliFill™ water level control system.
Explains how to use the automatic dispenser for laundry additives.
Guides on adding detergent to the main detergent compartment.
Instructions for using the bleach compartment with liquid chlorine bleach.
Guidance on adding liquid fabric softener to its compartment.
Provides steps for cleaning the washer's interior to prevent odors and residue.
Outlines how to clean the automatic dispenser components.
Instructions for preparing the washer for storage.
Explains displayed information codes and their solutions.
Details the full and limited warranty coverage for the Neptune washer.
Lists conditions and damages that are excluded from warranty coverage.
Provides instructions on how to contact Maytag for warranty service.
