EasyManua.ls Logo

Maytag MAT20MNBKW - User Manual

Maytag MAT20MNBKW
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
W11295172C
INSTALLATION INSTRUCTIONS
(ORIgINAL INSTRUCTIONS)
CommerCial Washer
Model maT20mNBKW
www.maytagcommerciallaundry.com
4
IMPORTANT SAFETY INSTRUCTIONS
precautions, including the following:
WARNING:
Read all instructions before using the dryer.
Keep a minimum clearance of 100 mm (4 in.) between the
rear of the dryer and any wall.
The operation of this appliance may affect the operation of
other types of appliances which take their air supply for safe
combustion from the same room. There has to be adequate
ventilation to replace exhausted air and thus avoid the
back-ow of gases into the room from appliances burning
other fuels, including open res, when operating the tumble
dryer. If in doubt, consult the appliance manufacturers.
Do not obstruct the air supply to the dryer (see Installation
Instructions for minimum clearances).
Do not place items exposed to cooking oils in your dryer.
Oil-affected items can ignite spontaneously, especially when
exposed to heat sources such as in a tumble dryer. The
items become warm causing an oxidation reaction in the oil.
Oxidation creates heat. If the heat cannot escape, the items
can become hot enough to catch re. Piling, stacking or
storing oil-affected items can prevent heat from escaping
and so create a re hazard.
If it is unavoidable to dry in the dryer items that have been
soiled with substances such as cooking oil, acetone, alcohol,
petrol, kerosene, spot removers, turpentine, waxes and wax
removers, or that have been contaminated by hair care
products, should be washed in hot water with an extra
amount of detergent before being dried in the dryer. These
items may give off vapours that could ignite or explode. Such
washing will reduce, but not eliminate, the hazard.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instructions concerning
use of the appliance by persons responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
The dryer should not be used if industrial chemicals have
been used for cleaning.
Before the dryer is removed from service or discarded,
remove the doors to the drying compartment.
Do not reach into the dryer if the drum is moving. A door
switch is tted for your safety.
Do not install or store the dryer where it will be exposed
to the weather.
Do not tamper with controls.
Do not continue to use this appliance if it appears to be
faulty.
Do not repair or replace any part of the dryer or attempt
any maintenance unless specically recommended in this
Use and Care Guide. Repairs and servicing should only
be carried out by competent service personnel.
Do not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric
softener or product. Follow their instructions.
Clean dryer lint screen before or after each load. Do not
operate dryer without lint screen in place.
Keep area around the exhaust and inlet openings and
adjacent surrounding areas free from the accumulation of
lint, dust, and dirt.
The interior of the dryer and exhaust vent should be
cleaned periodically by qualied service personnel.
See Installation Instructions for earthing instructions.
Do not dry unwashed items in this dryer.
Items such as foam rubber (latex foam), shower caps,
waterproof textiles, rubber backed articles and clothes or
pillows tted with foam rubber pads must only be dried
on a clothesline.
SAVE THESE INSTRUCTIONS
WARNING: Never stop a tumble dryer cycle before the
end of the drying cycle unless all items are quickly removed
and spread out so that the heat is dissipated.
To reduce the risk of re, electric shock, or injury to persons when using the dryer, follow basic
The nal part of a tumble dryer cycle occurs without heat
(cool down cycle) to ensure that the items are left at a
temperature that ensures the items will not be damaged.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualied
person in order to avoid a hazard.
Question and Answer IconNeed help?

Do you have a question about the Maytag MAT20MNBKW and is the answer not in the manual?

Summary

WASHER SAFETY

TOOLS & PARTS

ALTERNATE PARTS & ACCESSORIES

DIMENSIONS

LOCATION REQUIREMENTS

INSTALLATION INSTRUCTIONS

LEVEL WASHER

Instructions on how to properly level the washing machine.

CONNECT DRAIN HOSE

DRAIN SYSTEM

CONNECT INLET HOSES

ELECTRICAL REQUIREMENTS

EARTHING INSTRUCTIONS

Proper grounding procedures to prevent electric shock.

COMPLETE INSTALLATION

Summary

WASHER SAFETY

TOOLS & PARTS

ALTERNATE PARTS & ACCESSORIES

DIMENSIONS

LOCATION REQUIREMENTS

INSTALLATION INSTRUCTIONS

LEVEL WASHER

Instructions on how to properly level the washing machine.

CONNECT DRAIN HOSE

DRAIN SYSTEM

CONNECT INLET HOSES

ELECTRICAL REQUIREMENTS

EARTHING INSTRUCTIONS

Proper grounding procedures to prevent electric shock.

COMPLETE INSTALLATION

Overview

This document provides installation instructions and operational guidelines for a Maytag Commercial Washer, specifically model MAT20MNBKW. It is designed for both owners and authorized service personnel, ensuring safe and efficient use and maintenance of the appliance.

Function Description

The Maytag Commercial Washer is a heavy-duty appliance designed for commercial laundry environments, such as staff kitchens, offices, farmhouses, hotels, motels, bed and breakfast establishments, and communal laundrettes. Its primary function is to efficiently wash various types of laundry, accommodating a maximum load size of 7.7 kg. The washer is engineered to handle different fabric types and soil levels, offering a range of wash cycles to suit diverse needs. It operates with both hot and cold water inputs and requires a proper drain system for wastewater disposal. The appliance is built to withstand the rigors of frequent commercial use, emphasizing durability and reliable performance.

Usage Features

The washer is designed for straightforward operation, though proper installation is crucial for optimal performance and to minimize noise and vibration. Users should be aware of the typical full load sizes to avoid overloading, which can impact wash quality and machine longevity. The manual provides detailed loading suggestions for various load types, including mixed loads, heavy work clothes, permanent press, and knits, ensuring efficient use of the 7.7 kg capacity.

For safety, users are warned against washing items with any type of oil, as this can lead to fire or explosion. It is also recommended to avoid washing fiberglass items in coin-operated washers to prevent residue buildup. Children should be supervised when near the washer, and they should not be allowed to play with or inside the appliance. Before discarding the washer, the door or lid should be removed to prevent accidental entrapment.

The washer requires a water heater set to 49°C (120°F) for optimal performance. Water pressure between 138–690 kPa (20–100 psi) is necessary, and a pressure reduction valve should be used if inlet pressure exceeds 690 kPa (100 psi) to protect the mixing valve. The appliance must be plugged into an earthed electrical outlet, and extension cords or portable outlet devices should not be used.

The installation process, detailed for authorized service personnel, includes several steps that impact usage. Proper leveling of the washer is essential to reduce excessive noise and vibration during operation. The drain hose must be correctly routed and secured to prevent water leakage and ensure efficient drainage. The manual specifies requirements for various drain systems, including floor drains, wall standpipes, floor standpipes, and laundry tubs, with minimum height and capacity requirements to ensure proper siphon break and prevent backflow.

Connecting the inlet hoses correctly to both hot and cold water faucets is also critical. New hoses supplied with the washer should always be used, and old hoses should never be reused. The couplings must be tightened securely, but not overtightened, to prevent damage to the valves and ensure leak-free connections. Before the first use, it is recommended to run water through the faucets and inlet hoses to clear any particles that could clog the inlet valve screens. A test cycle with half the recommended detergent for a medium-size load should be run to clean the washer and verify proper operation.

Maintenance Features

The manual emphasizes several maintenance aspects, primarily through proper installation and regular checks. For instance, the inlet hoses should be replaced after five years of use to reduce the risk of failure, and their installation/replacement dates should be recorded. Periodic inspection of hoses for bulges, kinks, cuts, wear, or leaks is advised, with immediate replacement if any issues are found.

The washer's design incorporates features that facilitate maintenance by authorized service personnel. The installation instructions detail how to access and secure various components, such as the drain hose and leveling feet, which might require adjustment over time. The importance of removing shipping materials, including the shipping base and packing tray, is highlighted, with a recommendation to keep these materials in case the washer needs to be moved later.

For any assistance or service needs, owners are directed to contact their authorized Maytag Commercial Laundry distributor or an authorized service company. The model and serial numbers, found on the serial-rating plate, are necessary for obtaining service. The manual also provides contact information for written correspondence with the Maytag Commercial Laundry Service Department.

Regarding disposal, the appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). This indicates that the product should not be treated as household waste but should be handed over to an applicable collection point for the recycling of electrical and electronic equipment. This ensures proper disposal to avoid potential negative consequences for the environment and human health, aligning with local environmental regulations.

The warranty information outlines a five-year limited warranty covering factory-specified replacement parts for defects in materials or workmanship, provided the appliance is installed, maintained, and operated according to instructions. This warranty does not cover labor costs or damages resulting from improper installation, misuse, or unauthorized repairs, underscoring the importance of professional installation and adherence to guidelines for longevity and performance.

Maytag MAT20MNBKW Specifications

General IconGeneral
BrandMaytag
Model NumberMAT20MNBKW
ColorWhite
Washer TypeTop Load
AgitatorYes
Number of Wash Cycles11
Energy Star CertifiedNo
Voltage120V
Spin Speed700 RPM
Width27.5 inches
Height43 in
Depth27 inches

Related product manuals