Installation
Instructions
Gas Dryer
Keep instructions for future reference.
Be sure manual stays with dryer.
f
You'll Need a Few Things Before You Begin
Stainless Steel cJ _@_
or Hard Pipe _ _
Gas Connector ÷_t-_. _
Teflon Tape or
Joint Compound
Duct Tape
Wrench
Screw _
Drivers
Level
REMOVE PARTS
AND CLEAN
DRYER DRUM
Wipe drum with clean rag and soap
diluted in warm water to remove
any oil used in manufacturing. Make
a paste of laundry detergent and
clean drum if necessary.
To reverse the direction that the
door opens, see the User's Guide•
7
J
J
Questions ?
See the User's Guide or
call Maytag Appliances
Sales Company
1-800-688-9900 USA
1-800-688-2002
Canada
1-800-688-2080
TTY USA Only
Optional Kits
Kits are available at extra cost
through your Maytag dealer or
Maytag Customer Assistance at
1-800-688-9900 USA
1-800-688-2002 Canada
1-800-688-2080 TTY USA Only
Directional Exhaust Kit
DK1 Sales Accessory (Directional
Exhaust Kit #528P3).
Flexible Metal Vent Kit
Exhausting the dryer in hard-to-
reach locations can be accom-
plished by installing Kit # 521P3.
Manufactured (Mobile) Home
Installation Kit
Manufactured home anchor Kit
#526P3.
Propane Gas Conversion Kit
LPK1 Sales Accessory
(L.P./Propane Kit # 649P3).
Part No. 40136401 Printed in U.S.A. 11/01
To Next Page
Need help?
General
