Need help?Do you have a question about the Maytag MDG78PN and is the answer not in the manual?
Explains the safety alert symbol, DANGER, and WARNING.
Provides steps to take if a gas leak is detected.
Lists key safety rules for operating the dryer.
Warns about chemicals known to cause cancer and reproductive harm.
Outlines specific installation requirements for Massachusetts.
Requires restraint for moving and external power removal.
Advises labeling wires before disconnection during servicing.
Warns against operating the dryer with panels removed.
Emphasizes using multiple people and equipment for lifting.
Mandates adherence to local, state, and national codes.
Details dryer leveling, necessary tools, and door handle installation.
Warns against flammables, garage installation, and covers floor/clearances.
Specifies required clearances and make-up air opening sizes.
Alerts to damage from dry cleaning solvent fumes.
Details proper exhaust duct design, material, and back pressure.
Guides on duct routing, turns, smoothness, and inspection.
Advises against fans and specifies clearances for openings.
Instructions for protecting outside vent openings from weather.
Rules for channeling multiple dryers and required cross-sectional areas.
Covers electrical codes, grounding, and wire type requirements.
Details power disconnect requirements and electrical service specs.
Mandates grounded connection and explains power connection options.
Requirements for gas supply lines, shutoff valves, and LP pressure.
Information on gas types and conversion procedures.
Covers workmanship, pressure regulators, and meter ratings.
Details manual shutoff valve placement and gas pressure testing isolation.
Covers piping size, elevation adjustments, and flexible hose use.
Provides detailed specifications for gas types and inputs.
Details inlet connection size, supply line, and clearances.
Step-by-step guide for performing a gas pressure test.
Emphasizes checking codes and professional installation.
Covers system requirements, freezing protection, and connection steps.
Guides on pre-use testing and removing tumbler oil coating.
How to select cycles, start, control, and stop the dryer.
Steps for disconnecting power, fuel, and water.
Guides on obtaining service and replacement parts.
Overview of periodic cleaning and specific procedures.
Checklist for inspecting bolts, connections, belt, and safety devices.
Explains the meaning of each item on the dryer's data label.
To Next Page
General
