EasyManua.ls Logo

Maytag MDG75PNH User Manual

Maytag MDG75PNH
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MDG75PNH and MDG75MNV
(1,000 CFM/Phase 7 with S.A.F.E.)
Installation Manual
122002JEV/mcronan Part No. 113394
RETAIN THESE INSTRUCTIONS IN A SAFE
PLACE FOR FUTURE REFERENCE
WARNING: For your safety the information in
this manual must be followed to minimize the
risk of fire or explosion or to prevent property
damage, personal injury or death.
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not
use any phone in your building.
Clear the room, building or area of all
occupants.
Immediately call your gas supplier from a
neighbors phone. Follow the gas suppliers
instructions.
If you cannot reach your gas supplier, call
the fire department.
Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.
AVERTISSEMENT: Assurez-vous de bien
suivre les instructions données dans cette notice
pour réduire au minimum le risque dincendie
ou dexplosion ou pour éviter tout dommage
matériel, toute blessure ou la mort.
Ne pas entreposer ni utiliser dessence ni
dautres vapeurs ou liquides inflammables à
proximité de cet appareil ou de tout autre
appareil.
QUE FAIRE SI VOUS SENTEZ UNE ODEUR
DE GAZ:
Ne pas tenter dallumer dappareils.
Ne touchez à aucun interrupteur. Ne pas
vous servir des téléphones se trouvant dans
le bâtiment.
Évacuez la pièce, le bâtiment ou la zone.
Appelez immédiatement votre fournisseur
de gaz depuis un voisin. Suivez les
instructions du fournisseur.
Si vous ne pouvez rejoindre le fournisseur
de gaz, appelez le service des incendies.
Linstallation et lentretien doivent être assurés par
un installateur ou un service dentretien qualifié
ou par le fournisseur de gaz.
Question and Answer IconNeed help?

Do you have a question about the Maytag MDG75PNH and is the answer not in the manual?

Maytag MDG75PNH Specifications

General IconGeneral
BrandMaytag
Model NumberMDG75PNH
TypeGas Dryer
Capacity7.0 cu. ft.
ColorWhite
Dryer VentingVented
Number of Cycles11
Number of Temperature Settings5
Wrinkle Prevention OptionYes
Energy Star CertifiedNo
Width29 in
Height44 inches
Weight130 lbs.

Summary

SAFETY PRECAUTIONS

General Safety Warnings

Critical safety warnings regarding fire, explosion, electrical hazards, and proper dryer operation.

Gas Leak Procedures

Step-by-step instructions for responding to the smell of gas.

SPECIFICATIONS

Technical Data

Detailed specifications of the dryer, including capacity, dimensions, airflow, and electrical/gas requirements.

Component Identification

Identification of key dryer components through front and rear view diagrams.

INSTALLATION PROCEDURES

Location & Enclosure Requirements

Guidelines for selecting a suitable installation location and necessary clearances around the dryer.

Air Supply & Exhaust Requirements

Requirements for fresh air intake and proper exhaust ducting design and installation.

Electrical & Gas Information

Requirements for electrical connections, wiring, gas supply, and technical gas data.

Operation Preparation & Testing

Checks and procedures before initial operation, including preoperational tests.

SERVICE AND PARTS INFORMATION

Obtaining Service

Guidance on contacting qualified technicians and the Maytag dealer for service needs.

Ordering Replacement Parts

Information on how to identify and order correct replacement parts for the dryer.

ROUTINE MAINTENANCE

Cleaning

Recommended schedule and methods for cleaning lint screens, filters, and ductwork.

Adjustments and Lubrication

Procedures for checking and adjusting dryer components, belts, and lubrication.

Lint Drawer Management

Instructions for removing, cleaning, and reinstalling the dryer's lint drawer.

DATA LABEL INFORMATION

Understanding the Data Label

Explanation of essential information found on the dryer's data label for service and identification.

FUNCTIONAL CHECK OF REPLACEMENT COMPONENTS

Controller and Ignition System Checks

Procedure for checking the functionality of replacement control boards and ignition systems.

DSI Controller Checks

Checks for DSI modules, including LED indicators and theory of operation.

MANUAL RESET BURNER HI-LIMIT INSTRUCTIONS

Phase 7 Computer System

Instructions for resetting the burner hi-limit on Phase 7 computer-controlled dryers.

Dual Timer System

Instructions for resetting the burner hi-limit on dual timer dryers.

S.A.F.E. FIRE EXTINGUISHING SYSTEM

System Installation Requirements

Requirements for water supply, pressure, and connection for the S.A.F.E. system.

System Operation and Reset

Explanation of the S.A.F.E. system's fire detection, activation, and reset procedures.

Diagnostics and Valve Testing

Procedures for testing the water valve, diagnosing faults, and system status messages.

Related product manuals