To Next PageTo Next PageWhy is the load not completely covered in water in my Maytag Washer?
It's normal for an HE front-load Maytag washer to not completely cover the load in water. The washer senses the load size and adds the correct amount of water for optimal cleaning.
Key safety precautions to reduce risks of fire, electric shock, or injury during washer use.
Warnings about chemicals in the product known to cause cancer or birth defects.
Information on quality parts and accessories designed specifically for the appliance.
Overview of the washer's control panel, including features and touch sensitivity.
Details on available wash cycle options like Fresh Hold, Steam for Stains, Extra Rinse, and Cycle Signal.
Explains how to determine and set detergent concentration for optimal cleaning results.
Instructions on how to add HE detergent to the dispenser drawer.
Guide to filling the Optimal Dispense cartridge and adding HE liquid detergent.
Steps for sorting, preparing, and properly loading laundry into the washer.
Instructions on adding detergents, fabric softener, and bleach to dispensers.
Guide to selecting cycles, adjusting settings, and adding options.
Instructions on starting, pausing, canceling, and removing garments after the wash.
Recommendations for keeping the washer clean and performing optimally.
Steps for cleaning the door seal, interior, and dispensers.
Guidelines for winter storage, transporting, and preparing the washer for reuse.
Explains error codes displayed on the washer and provides solutions for common issues.
Addresses common problems like vibration, noises, water leaks, and improper washing performance.
Details what is covered and not covered under the Maytag limited warranty.
Information on how to obtain replacement parts and accessories.
Guidance on contacting customer support for assistance and service needs.
General
