To Next PageTo Next Page
Need help?Do you have a question about the Maytag MLG2000AWW and is the answer not in the manual?
General| Brand | Maytag |
|---|---|
| Model | MLG2000AWW |
| Category | Washer/Dryer |
| Language | English |
Lists tools required for installing the washer/dryer unit.
Lists components supplied with the appliance for installation.
Discusses appliance placement, clearances to combustibles, and make-up air requirements.
Details mandatory outside exhausting and warnings against using plastic ducting.
Provides guidelines on maximum exhaust duct lengths based on type and number of turns.
Specifies rules for duct routing, hood type, clearance, and prohibited connections.
Lists essential checks for existing exhaust systems before connecting the dryer.
Specifies the required water pressure range for proper washer operation.
Details the recommended standpipe height and drain hose routing for proper drainage.
Advises on the type of flooring suitable for washer installation to minimize vibration.
Recommends installation locations to avoid freezing temperatures and potential water damage.
Details gas type, conversion, supply line, shut-off valve, and code compliance.
Explains the dryer's automatic ignition system without a pilot light.
Emphasizes proper grounding to prevent shock, fire, and injury, citing electrical codes.
Explains the necessity of grounding for electrical safety and shock prevention.
Details grounding for gas models, including plug requirements and safe connection points.
Outlines grounding methods for electric models, including wired connections and ground straps.
Advises on dedicated circuits, avoiding extension cords, and specific requirements for gas models.
Covers 120/240V service, cord requirements, and 120/208V conversion for U.S. models.
Notes that Canadian models include a power cord and cannot be converted to 208V.
Outlines service requirements and grounding for export electric models.
Provides contact information for ordering replacement parts and accessories.
Offers contact details for international distributors and Maytag International.
Instructions for carefully removing packaging and shipping straps from the appliance.
Guidance on tipping the appliance onto its back and securing it.
Details on routing the drain hose, ensuring proper height, and preventing kinks.
Instructions for attaching inlet hoses with screen strainers to hot and cold faucets.
Guidance on leveling the appliance on all four sides using a carpenter's level.
Instructions for applying joint compound or Teflon tape to the gas pipe connection.
Procedures for checking gas supply connections for leaks using a soap solution.
Details on securing the vent pipe to the exhaust duct with a clamp.
Step-by-step guide for connecting the power cord using a 3-wire system.
Instructions for connecting the power cord using a 4-wire system.
Guidance for connecting the power cord using a 2-wire and ground system.
Details on electrical service and gas conversion for export gas models.
Instructions for installing the washer and dryer timer knobs on their respective shafts.
Step-by-step guide for removing and reattaching the dryer door to the opposite side.
Detailed procedure for reversing the washer door and its hinges.
Checklist of items to verify before operating the appliance.
Procedure for testing the washer's functionality through a complete cycle.
Verification steps to ensure the dryer runs, heats, and shuts off correctly.
