To Next PageTo Next Page
Need help?Do you have a question about the Maytag MLE2000AYW and is the answer not in the manual?
General| Brand | Maytag |
|---|---|
| Model | MLE2000AYW |
| Color | White |
| Voltage | 120V |
| Amperage | 15A |
| Energy Star Certified | No |
Lists necessary tools and items included with the appliance for installation.
Details proper exhaust duct material, length, routing, and hood type for dryer venting.
Specifies water pressure, drain hose height, standpipe requirements, and floor stability.
Advises on suitable installation locations, avoiding freezing and ensuring proper operating temps.
Covers gas type, conversion, supply line, shut-off valve, and ignition system details.
Explains the importance and methods of proper grounding for safety and electrical code compliance.
Details electrical grounding methods, plug requirements, and wiring for various system types.
Covers electrical needs for U.S. and Canadian electric/gas models, including voltage and frequency.
Step-by-step guide on removing shipping straps and preparing the appliance for movement.
Instructions for laying the appliance down and moving it to its installation location.
Guides proper connection of the washer drain hose to the standpipe or drain facility.
Details connecting the hot and cold water inlet hoses to the appliance and water supply.
Provides instructions for connecting the gas supply line to the dryer, including fittings and leak checks.
Step-by-step guide for connecting the dryer using a 3-wire electrical system.
Step-by-step guide for connecting the dryer using a 4-wire electrical system.
Covers 2-wire system, export model electrical requirements and connections.
Instructions for installing the washer and dryer timer knobs onto their respective shafts.
Detailed steps for reversing the swing direction of the dryer door.
Detailed steps for reversing the swing direction of the washer door.
A comprehensive checklist to ensure all installation steps are completed correctly.
Procedure for testing the washer and dryer to confirm proper operation after installation.
