Maytag MVW6230HW User Manual (English)

To Next Page

QUICK REFERENCE GUIDE QUICK REFERENCE GUIDE

MAYTAGMAYTAG

TOP LOADING WASHING MACHINE TOP LOADING WASHING MACHINE

CONTROL PANEL AND FEATURES

POWER

Touch to turn on/off or to stop/cancel a cycle.

CYCLE KNOB

Turn knob to select desired cycle.

EXTRA POWER

Press to boost stain ﬁghting on selected cycle.

DISPLAY LCD

The display shows the time required for the cycle to complete.

Factors such as load size and water pressure may affect the

time shown in the display. Tightly packed loads, unbalanced

loads, or excessive suds may cause the washer to adjust cycle

time as well.

ADD GARMENT

When Add Garment is lit, you may open the lid, which automatically

pauses the cycle, and add items. To resume, close the lid and hold

the START/PAUSE button to start the washer again.

START/PAUSE

Touch and hold the START/PAUSE button to start cycle. Touch

during a cycle to pause cycle and unlock lid.

NOTE: If machine is spinning it may take longer to unlock lid.

CYCLE MODIFIERS (Not all modiﬁers are available on all cycles)

SPIN

Touch to modify the cycle’s available spin speeds (Off, Medium,

Fast).

TEMP

Touch to modify the cycle’s available temperatures (Tap Cold,

Cold, Cool, Warm, Hot).

SOIL

Touch to modify the cycle’s available soil levels. Increase soil

level for heavily soiled items and decrease soil level for lightly

soiled items (Extra Light, Light, Normal, Heavy, Extra Heavy).

CYCLE OPTIONS (Not all options are available on all cycles).

DEEP FILL

Touch to add more water to the washer from the cycle’s auto

sensed level (Auto, Medium, High, Max Fill).

REMOTE ENABLE

Touch each time you want to remotely control via the Maytag™

app. Follow the instructions in the “GET THE MAYTAG™ APP

AND GET CONNECTED” section below for more details.

Opening the lid cancels “Remote Enable”.

FABRIC SOFTENER

Touch to let the machine know when you have added fabric

softener to the dispenser drawer.

DELAY START

Touch to delay the start of the wash cycle for up to 12 hours.

EXTRA RINSE

Touch to automatically add a second rinse available on most

cycles.

CYCLE SIGNAL

Touch to turn the end of cycle signal on/off and adjust the tone

volume when a button is touched.

NOTE: If the washer detects an out-of-balance condition it

may pause and attempt to correct the situation. During this time

“OOB” will brieﬂy be displayed.

W11556494C

Appearance may vary depending on model.

Need help?

Do you have a question about the Maytag MVW6230HW and is the answer not in the manual?

Maytag MVW6230HW Specifications

General

Style	top load
Color	white
Washer Capacity	4.7 cubic feet
Max Spin Speed	750 revolutions per minute
Spin Speeds	3
Number of Cycles	11
Cycle Selections	bulky items, clean washer with affresh, custom cycle, delicates, drain & spin, heavy duty, normal / regular, quick wash, towels, whites, wrinkle control
Temperature Settings	5
Temperature Selections	hot, cold, tap cold, cool, warm
Soil Levels	light, extra light, extra heavy, normal, heavy
Internal Heater	no
Control Panel	dial, touchpad
Delay Start / End	yes
Child Lock	yes
Cycle Signal	yes
Interior Light	yes
Steam	no
Dispenser	single load
Smart Home	remote start available; optional cycle notifications; schedule wash cycle available; voice control with alexa and google enabled devices, true
Wi-Fi	wi-fi
Annual Energy Consumption	341 kilowatt hours
Voltage	120 volts
Current	15 amperes