To Next PageTo Next PageWhy Maytag Washer won't run - check proper electrical supply?
If your Maytag Washer won’t run or fill, check the power cord is plugged into a grounded 3-prong outlet and avoid using an extension cord. Ensure there is power to the outlet. Reset a tripped circuit breaker or replace any blown fuses. If problems continue, contact an electrician.
Why is my Maytag MVWB755DW Washer leaking water?
If you notice water leaks from your Maytag Washer, it could be due to the washer not being level, causing water to splash. Make sure that the fill hoses are tightly connected and that all four fill hose flat washers are properly seated. Also, check the drain hose connection and ensure it is properly secured to the drainpipe or laundry tub, without any tape over the drain opening. Inspect household plumbing for leaks or clogs in the sink or drainpipe. Unbalanced loading can also cause leaks, so refer to the 'Using Your Washer' section for correct loading instructions.
Why is my Maytag MVWB755DW making clicking or metallic noises?
If you hear clicking or metallic noises from your Maytag Washer, objects may be caught in the washer drain system. Empty pockets before washing, as loose items like coins could fall between the basket and tub or block the pump. It may be necessary to call for service to remove the items. It is also normal to hear metal items on clothing, such as metal snaps, buckles, or zippers, touch against the stainless steel basket.
Why is my Maytag Washer not cleaning or removing stains properly?
If your Maytag Washer is not cleaning or removing stains effectively, it may be because the washer senses the load size and adds the correct amount of water, which may not fully cover the wash load. Avoid adding more water, as this can lift the laundry off the washplate and reduce cleaning effectiveness. Ensure the washer is not loaded too tightly and add detergent, Oxi products, and color-safe bleach to the bottom of the basket before adding the load items. Wash like colors together and promptly remove them after the cycle to prevent dye transfer. Ensure you are using HE detergent and the correct cycle for the fabric type.
Why are the wash or rinse temperatures incorrect on my Maytag MVWB755DW?
If you're experiencing incorrect wash or rinse temperatures with your Maytag Washer, make sure the hot and cold inlet hoses are not reversed. Both hoses must be attached to both the washer and faucet, ensuring hot and cold water flow to the inlet valve. Also, check that the inlet valve screens are not clogged and remove any kinks in the hoses.
Why is the lid locked light flashing on my Maytag Washer?
If the lid locked light is flashing on your Maytag Washer, make sure the lid is fully closed. The washer will not start or fill if the lid is open. Also, the light may flash if a cycle was stopped or paused using the Start/Pause button.
How to prevent load tangling in my Maytag MVWB755DW?
If your Maytag Washer is tangling clothes, refer to the “Using Your Washer” section for proper loading techniques. Select a cycle with a slower wash action and spin speed, keeping in mind that items will be wetter than with higher speeds. Consult the “Cycle Guide” to match your load with the best cycle. Load items in loose heaps evenly around the washplate. Reduce tangling by mixing types of load items and using the recommended cycle for the items being washed.
What to do if Maytag MVWB755DW is tightly packed?
If your Maytag Washer is not performing as expected and the washer may be tightly packed, remove several items and rearrange the load evenly around the washplate. Close the lid, then touch and hold the START/PAUSE button. Add only 1 or 2 additional garments after the washer has started. Do not add more water to the washer.
How to remove sand, pet hair, and lint from clothes in my Maytag MVWB755DW Washer?
If you find sand, pet hair, lint, etc. on your load after washing in your Maytag Washer, it may be due to heavy residues. Add an Extra Rinse to the selected cycle to help remove these residues.
Why is the dispenser not working correctly in my Maytag Washer?
If you are experiencing incorrect dispenser operation with your Maytag Washer, do not overfill the dispenser, as this causes immediate dispensing. Load dispensers before starting a cycle. Small amounts of water may remain in the dispenser at the end of the cycle, which is normal. If you have low water pressure, select a warmer wash temperature if possible, depending on your load, to avoid residual powder in the dispenser. Clean the dispenser nozzle and ensure the drawer is properly seated.
General| Brand | Maytag |
|---|---|
| Model | MVWB755DW |
| Type | Top Load Washer |
| Capacity | 4.7 cu. ft. |
| Color | White |
| Agitator | Yes |
| Spin Speed | 850 RPM |
| Water Level Selection | Yes |
| Energy Star Certified | Yes |
| Number of Wash Cycles | 11 |
| Steam Function | No |
| Sanitize Cycle | Yes |
| Dispenser | Yes |
| Deep Fill Option | Yes |
| Power Source | Electric |
| Voltage | 120 V |
| Depth | 27 inches |
| Wash Cycles | Bulky Items, Delicates, Heavy Duty, Normal, PowerWash, Rinse & Spin |
| Width | 27 1/2 inches |
Covers essential precautions for using the washer safely, including avoiding flammables.
Solutions for washer vibration, rocking, or walking during operation.
Troubleshooting steps for when the washer won't run, fill, or stops unexpectedly.
Solutions for issues with the washer not draining or spinning properly.
Tips for preventing tangling and dealing with sand, pet hair, or lint residue.
Solutions for problems caused by excessive suds or tightly packed loads.
Explains causes for dry spots and problems with load rinsing.
Identifies causes and solutions for water leaks, focusing on proper installation.
Addresses issues related to using the wrong type or amount of detergent.
Addresses issues like insufficient water and basic operational failures.
