OPERATING SOUNDS
High pitched sound during a spin
cycle.
The motor increases speed to spin the tub to remove moisture from the
load.
On some cycles, the tumbling stops and the washer pauses during the
cleaning process.
After reaching the maximum spin speed, the machine may reduce spin
speed slightly for maximum performance.
The tumbler will begin to accelerate to speed, then slows back down and
tumbles to redistribute the load more evenly when an unbalanced load
occurs.
The Maytag Neptune
®
clothes washer uses a true adaptive fill and adds
more water during the wash cycle as it is needed.
Water flows through the dispensers to dilute and add bleach or fabric sof-
tener at the appropriate time.This will occur even if bleach and fabric sof-
tener are not used.
Before the washer starts to fill, it will make a clicking noise to lock the lid
and do a quick drain.
OR
“Whirring” sound followed by a
pause,
repeated throughout the wash
cycle.
Clothes washer maintains a
slightly
reduced spin speed
after achieving a
higher spin speed.
The spin speed
slows down dramati-
cally when it sounds like an out-of-bal-
ance load.
Water is added after the washer
has been washing
for a while.
Clicking/draining sounds when
washer is started.
NORMAL OPERATING SOUNDS OF YOUR MAYTAG NEPTUNE
®
TL CLOTHES WASHER
To Next Page
Loading...
