Maytag W10560153B User Manual (English)

Questions and Answers:

H
Hunter CastilloAug 17, 2025
Why is my Maytag W10560153B Washer not draining or spinning properly?
- J
  Jeffery WalkerAug 17, 2025
  To prevent the Maytag Washer from not draining or spinning, make sure to empty pockets and use garment bags for small items. Using cycles with lower spin speeds removes less water than cycles with high spin speeds, so use the recommended cycle/spin speed for your garment. If needed, rearrange the load for even distribution and select DRAIN & SPIN to remove excess water. Ensure the drain hose is properly installed and not extending too far into the standpipe. Also, use only HE detergent, measuring it according to the load size, to avoid excessive suds.
Z
zhutchinsonAug 19, 2025
Why is my Maytag W10560153B Washer not cleaning or removing stains effectively?
- F
  franklauraAug 20, 2025
  To ensure proper cleaning and stain removal with your Maytag Washer, load garments loosely around the washplate and only with dry items. Add detergent, oxi products, and color-safe bleach to the bottom of the basket before adding clothes. Wash like colors together and promptly remove them after the cycle. Use only HE detergent, measuring it correctly, and select the appropriate cycle for the fabric type, considering a higher soil level and warmer wash temperature if needed. Load the dispenser before starting a cycle, and do not add products directly onto the load.
D
David FloresAug 23, 2025
What to do if the lid locked light is flashing on my Maytag W10560153B?
- J
  James SalinasAug 23, 2025
  If the lid locked light is flashing on your Maytag Washer, ensure that the lid is completely closed, as the washer will not start or fill with the lid open. If a cycle was stopped or paused, the lid will not unlock until the basket has stopped spinning, which may take several minutes, especially with large loads or heavy fabrics.
J
Jose MyersAug 26, 2025
How to troubleshoot Maytag W10560153B not performing?
- E
  Eric AdamsAug 26, 2025
  To ensure your Maytag Washer performs correctly, make sure both hot and cold water hoses are properly attached to the inlet valve and that both faucets are turned on. Check the inlet valve screens for any clogs and inspect the inlet hoses for kinks that might restrict water flow. Plug the power cord into a grounded 3-prong outlet, avoiding the use of extension cords, and ensure the outlet has power. Also, make sure the lid is closed for the washer to run. Note that the washer will pause during certain phases, and do not add more than 1 or 2 additional items after the cycle has started. Use only HE detergent to avoid excessive suds.
J
jnewtonAug 28, 2025
How to prevent load from tangling in Maytag W10560153B?
- J
  James AriasAug 28, 2025
  To prevent tangling in your Maytag Washer, load garments in loose heaps evenly around the washplate. Mixing types of load items can also help. Use the recommended cycle for the garments being washed, selecting one with a slower wash action and spin speed, though note that items may be wetter than those using a higher speed spin.
C
carlmanningAug 31, 2025
What to do if I see fabric damage after washing in my Maytag Washer?
- B
  Brittany DavidAug 31, 2025
  To avoid fabric damage in your Maytag Washer, empty pockets, zip zippers, and snap or hook fasteners before washing. Tie all strings and straps, and mend any rips or broken threads. Load garments loosely and use the appropriate cycle for the fabric. Do not pour liquid chlorine bleach directly onto the load and avoid using more bleach than recommended. Also, do not place items on top of the bleach dispenser.
T
tanner84Sep 2, 2025
Why is there sand, pet hair, or lint on my load after washing in my Maytag W10560153B?
- C
  Christian AdamsSep 2, 2025
  If you notice sand, pet hair, or lint on your load after washing in your Maytag Washer, it might be due to heavy residues requiring additional rinsing. Consider adding an Extra Rinse to the selected cycle.
S
Sean HancockSep 5, 2025
Why are the wash or rinse temperatures incorrect on my Maytag Washer?
- T
  Tricia JordanSep 5, 2025
  If you are experiencing incorrect wash or rinse temperatures with your Maytag Washer, ensure that the hot and cold inlet hoses are not reversed and are properly attached to both the washer and faucet, allowing both hot and cold water to flow to the inlet valve. Check the inlet valve screens for clogs and remove any kinks in the hoses.
J
Joseph DixonSep 8, 2025
What to do if load is not rinsed properly in Maytag Washer?
- A
  Anthony TurnerSep 8, 2025
  To address a load that is not rinsed in your Maytag Washer, first, ensure that the hot and cold inlet hoses are not reversed and are properly attached, allowing water to flow to the inlet valve. Check that both hot and cold water faucets are turned on, and inspect the inlet valve screens for clogs. Remove any kinks in the inlet hose. Use only HE detergent, measuring correctly, and avoid using too much. Load garments loosely around the washplate, using a cycle designed for the fabrics being washed, and add only 1 or 2 garments after the washer has started.
T
Thomas MoranSep 12, 2025
Why are there dry spots on load after cycle in Maytag W10560153B?
- W
  watkinscharlesSep 12, 2025
  It is normal for items near the top of the load to develop dry spots during the final spin due to the high spin speeds combined with air flow in Maytag Washers.

Maytag W10560153B Specifications

General

Category	Washer
Model Number	W10560153B
Brand	Maytag
Type	Top Load Washer
Color	White
Energy Star Certified	No
Number of Wash Cycles	11
Control Type	Electronic
Voltage	120V
Frequency	60 Hz
Amps	15A
Width	27.5 in
Height	42 in
Depth	27 in.